SNOWBOARD SERVICING & REPAIRS

Initial inspection. If we find any additional issues that we are concerned about then we’ll contact you to discuss repair / servicing options available before continuing any work. Edge sharpening using a specific power edger. As a default we bevel your edges slightly to reduce edge catch but let us know of any specific angles required. Base clean to remove residual old wax and other dirt. Hand ironed hot wax. Scrape, structure and polish

Initial inspection Base clean to remove residual old wax and other dirt. Belt grind to remove any stubborn marks and minor scratches Fill any deep gouges with P-Tex Second finer grade belt grind. Edge sharpening and bevel Hand ironed hot wax Scrape, structure and polish.

Initial inspection Base clean to remove residual old wax and other dirt. Primary belt grind to remove any stubborn marks and minor scratches Fill any deep gouges with P-Tex Second finer grade belt grind. Final stone grind to add structure to improve glide. Edge sharpening and bevel Hand ironed hot wax Scrape, structure and polish.

The existing edge has been bent beyond repair and needs cutting out and replacing with a new section of edge. A new edge requires a base patch to hold it in place.

The snowboard edge has been bent in from a heavy impact and pushed the base up, forming a bubble. We will straighten the edge, return the base to its normal level and then glue and clamp everything back together.

TSA-advanced-repairs-hero ADVANCED REPAIRS If your snowboard only needs a service, our workshops are also set up for this. Head over to servicing to find out more. If a large piece of the base has been damaged, a patch will be required to cover the damaged area. A new piece a base material is cut out and glued in place before being ground flush with the rest of the snowboard.

The edge has come away from the other layers of the snowboard. We will glue and clamp the edge back to the board and ensure it is completely watertight.

The top layer of the snowboard is fragile and can easily get chipped and damaged. We use epoxy resin to make the snowboard watertight again and stop water damaging the wood core.

A heavy impact to the sidewall of the snowboard can lead to a loose edge or water damage if not resolved. Our skilled technicians will rebuild your sidewall safeguarding your edges and core.